Søkeresultat for: “
digital receiver til salgs
”
Andre har kjøpt det du leter etter
Sammenligne med tidligere solgte varer
Sammenligne med tidligere solgte varer
Trådløs timer for Bl.a. 1100D/600D/60D/ 500D/ 550D/1000 495 ,- Solgt 13 år sedan På salg i 1 dag |
Kameratilbehør... | |||
Trådløs timer for Bl.a. 1100D/600D/60D/ 500D/ 550D/Canon, Nikon, Sony, Olympus, Fuji og Pentax modeller på lagerFjernutløser og selvutløser, intervall-timer, langtidseksponering og innstillbart antall eksponeringer. Tidsverket kan stilles fra 1 sekund til 99 timer, 59 minutter og 59 sekunder.Passer til bl.a.:Canon 1100D / 600D / 60D / 500D / 550D / 1000D / 350D / 400D / 450D / G10 / GPentax K10D/K100D/K20D/K200D/Gx-1L/Cs205 /K7/Km Pentax *ist D/DS/DS2/DL/DL2/KHasselblad H/H1/H2/H2D/H1DContax 645/Nl/Nx/N/Digital/LAFeatures: Interval timer --- The Interval Timer can be set to any time period up to 100 hours as well Long- exposure timer --- It allows you to take time exposures up to 100 hours long. Exposure-count setting --- This setting allows you to set the times of Exposures that will be taken, up to a total 399 times.Timer delay: 0 sec. to 99hours, 59minutes,59sec.Interval timer: 1 sec. to 99hours, 59minutes,59sec.Exposure timer: 0 sec. to 99hours, 59minutes,59sec.Power source:2 x AAA batteries + 1 x CRPackage included:x Timer Remote Transmitter 1x Receiver 1x Camera Shutter Connect Cable 1x CR2 Lithium battery 2x AAA batteries 1x Manual in Englishhttp://www.nordicimport.com/index.php?main_page=advanced_...word=timer |
||||
Futaba R6014 HS FASST mottaker 950 ,- Solgt 13 år sedan På salg i 3 dager |
Motorsykler Larvik |
|||
14 kanals Futaba FASST mottaker type R6014 HS selges. Kun brukt noen få ganger uten uhell og fremstår som ny. Pris hos Elefun kr 1695. Selges kr 950.Info: Once again Futaba lead the way, the R6014HS being the only 14 channel 2.4GHz receiver in the world, being suitable for even the largest and most sophisticated models, yet weighing a mere 21 grams. Aimed at the advanced pilot, and developed alongside the matching FTM-14 module for the 12FG/12Z/14MZ and FX40 transmitters, the combination will be deservedly popular for large scale models, jets and advanced helicopter use. This receiver from Futaba differs from the previous 14ch receiver because it can run on 2 modes. There is a "Normal Mode" where the receiver works like all previous Futaba 2.4 GHz receivers but there is also a "High Speed" setting with high resolution for the demanding modeller. The "Normal Mode" accepts any type of servos or the peripherals as the frame rate of the output is 14ms. The "High Speed mode" only accepts digital servos (including BLS series). The frame rate of the High Speed Mode outputs are 7ms (twice the standard speed). The outputs for other channels allow the use of any type of servos as the frame rate of these outputs are still 14ms on the High Speed mode.Specification Weight: 21g Dimensions: 52.5 x 37.5 x 16mm Channels: 14 |